1 SPECIFICATIONS
AG-D8800
AMPLIFIER Section
Output Power:
100+100 W (Stereo 0.7% THD,40Hz to 20 kHz,6 ohms)
Total Harmonic Distortion:
Audio Input Sensitivity/Impedance:
0.09% (at 100 W, 1kHz, 6 ohms)
200 mV/22 k ohms
*LINE: 200 mV/47 k ohms
Frequency Response:
*LINE: 20 Hz - 50 kHz, +0/-3 dB
Signal -to-Noise Ratio
*LINE: 92 dB (IHF-A)
Tone Control:
BASS: +/- 10 dB at 100 Hz, TREBLE: +/- 10 dB at 10 kHz
FM Tuner Section
Tuning Range:
87.5 MHz - 108.0 MHz (50 kHz steps)
Total Harmonic Distortion (1 kHz):
Mono: 0.5% , Stereo: 0.8%
Frequency Response:
30 Hz - 15 kHz, +/- 3dB
Stereo Separation (1 kHz):
Signal-to- Noise Ratio:
Mono: 70 dB / Stereo: 65 dB
(Without notes 100.1 MHz, 65 dBf)
AM Tuner Section
Tuning Range:
522 kHz - 1,611 kHz (9 kHz steps)
Usable Sensitivity :
Signal -to-Noise Ratio :
Total Harmonic Distortion :
120 W + 120 W ( 6 ohms, JEITA)
Surround Output Power
125 W per channel (0.7% THD, 1kHz, 6 ohms, only one channel driven)
150 W per channel (6 ohms, JEITA)
Output Level / Impedance (TAPE REC):
Digital Audio Section
Sampling Frequency:
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Digital Input Level:
COAXIAL ( 75 ohms): 0.5 Vp-p
Video Section
Output Level:
1 Vp-p (75 ohms)
Jacks:
RCA Jack
GENERAL
Power Requirements:
AC 230V ,50 Hz
Dimension (W x H x D ):
Weight:
Standard Accessories:
AM Loop Antenna x 1
FM Matching Transformer x 1
440 x 141 x 330 mm
9.9 kg
Instruction Booklet x 1
FM (T) Type Antenna x 1
Power Consumption:
200 W (STANDBY: 3 W or less)
AC Outlets(expect Australia model, total 100 W max):
Remote Control Unit (RC-1040 or RC-1042) x1
* LINE means CD, TAPE,VIDEO
Switched x 1
BATTERY (AAA, R03, UM-4) x 2
Design and specifications are subject to change without notice.
Illustrations may differ slightly from production model.
Weight and dimensions are approximate.
42 dB
500 uV/m
1.5 % at 100 dB/m
40 dB at 100 dB/m