TEAC X01LIMITED Owner's Manual

TEAC X01LIMITED Owner's Manual
0 Rating(s)
Read reviews

Owner's Manual for TEAC X01LIMITED, downloadable as a PDF file.

Manual details

Immediate download after payment.
Delivered as a PDF file.
The manual has 64 pages
File size: 1.45 MB
Available language versions: French, English, German
Different language versions may vary sligthly in file size and page count.

We guarantee that...

our manuals are complete,
our manuals are checked with antivirus,
We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

D00816700C

Super Audio CD/CD Player

Owner's Manual .................... 2

Manuel du Propriétaire ........... 23

Bedienungsanleitung.............. 44

D00816700C

Super Audio CD/CD Player

Owner's Manual .................... 2

Manuel du Propriétaire ........... 23

Bedienungsanleitung.............. 44

CAUTION

DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO

EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS

ARE WITHIN!

IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT,

CONTACT TEAC FOR A SERVICE REFERRAL. DO NOT USE THE

PRODUCT UNTIL IT HAS BEEN REPAIRED.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with

the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than

the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided

for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod,

bracket,

table

specified

the

manufacturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused

for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate normally,

or has been dropped.

Do not expose this apparatus to drips or splashes.

Do not place any objects filled with liquids, such as vases, on the

apparatus.

Do not install this apparatus in a confined space such as a book

case or similar unit.

The apparatus draws nominal non-operating power from the AC

outlet with its POWER switch in the off position.

The apparatus should be located close enough to the AC outlet

so that you can easily grasp the power cord plug at any time.

An apparatus with Class ! construction shall be connected to an

AC outlet with a protective grounding connection.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated "dangerous voltage" within the

product's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following

measures:

· Reorient or relocate the equipment and/or the receiving

antenna.

· Increase the separation between the equipment and

receiver.

· Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

· Consult the dealer or an experienced radio/TV technician

for help.

CAUTION

Changes or modifications to this equipments not expressly

approved by TEAC CORPORATION for compliance will void the

user's warranty.

For U.S.A.

ENGLISH

Optical pickup :

Type

: GH20707A2A

Manufacturer : SHARP CORPORATION

Laser output : Less than 1mW on the objective lens

Wavelength : 788±5 nm (CD)

For U.S.A.

Contents

Thank you for choosing TEAC. Read this manual carefully

to get the best performance from this unit.

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Restoring factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Remote Control Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Front panel features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Understanding the remote control unit . . . . . . . . . . . . . . . . . . 11

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Skipping playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Selecting a track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Fast scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Selecting the playback area. . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Programmed playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Repeat mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Display dimming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Analog sound output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Changing the display mode . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Clock Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Settings (introduction). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Audio Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Speaker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

This product has been designed and manufactured according to

FDA regulations "title 21, CFR, chapter 1, subchapter J, based on

the Radiation Control for Health and Safety Act of 1968", and is

classified as class 1 laser product. There is not hazardous invisible

laser radiation during operation because invisible laser radiation

emitted inside of this product is completely confined in the

protective housings.

The label required in this regulation is shown .

For European customers

Disposal of your old appliance

1. When this crossed-out wheeled bin

symbol is attached to a product it means

the product is covered by the European

Directive 2002/96/EC.

2. All electrical and electronic products should be disposed of

separately from the municipal waste stream via designated

collection facilities appointed by the government or the

local authorities.

3. The correct disposal of your old appliance will help prevent

potential negative consequences for the environment and

human health.

4. For more detailed information about disposal of your old

appliance, please contact your city office, waste disposal

service or the shop where you purchased the product.

The world's first VRDS mechanism for Super

Audio CD players, incorporating a magnesium

turntable and a SS400 bridge

The VDRS mechanism completely eliminates any vibration of

the disc itself, thanks to the full-diameter clamp, which

clamps the disc securely to the turntable. In addition, warping

and other defects of the disc are eliminated. The constancy of

the reading angle between the optical pickup and the disc

pits is therefore increased, and read errors, together with the

occurrence of timing errors to the clock circuit, are

significantly reduced.

Playback of Super Audio CDs requires high-speed rotation and

a high degree of precision, and the X-01 accordingly uses a

magnesium turntable. This has only two-thirds the specific

gravity of aluminum and has excellent shock-absorbent

properties. The bridge employs a pair of precisely engineered

ball bearings, and is constructed of SS400 steel, mounted

directly on the 5mm thick steel base plate.

Coreless motor with neodymium magnets

A newly-developed three-phase brushless spindle motor

provides the fast and accurate turntable rotation required for

Super Audio CD playback. This, and the fixing of the

turntable together with the use of precision ball bearings,

eliminate irregular rotation and vibration.

Research has shown that neodymium is the optimum

magnetic material for this application. Neodymium absorbs

changes to the motor's electric power supply, and exerts

minimal influence on the audio sections of the unit.

Constant-angle optical pickup mounted on a

sled with feedback-monitored speed control

By mounting the pickup on a sled whose axis is rigid, the

pickup lens is maintained at a constant angle and the laser

beam, and hence the optical axis, is maintained in an accurate

vertical orientation. An Esoteric original three-phase brushless

motor with Hall element detection drives the sled, and the

speed of the sled is monitored and used to control the sled

itself in a servo feedback operation, meaning the sled is highly

responsive and smooth in its operation.

Sturdy, rigid chassis with triple-point

pinpoint foot support

The unit is constructed with a 5mm thick robust steel base

plate, and is divided into three logical sections, thereby

reducing interference between components of the unit.

Highly rigid mounts are used for the VDRS disc mechanism.

To eliminate vibration, three solid (tool steel) feet support the

unit and isolate it mechanically.

Brushed aluminum finish exemplifies the

quality of construction

The front, side and top panels are constructed of thick

brushed aluminum. The high-quality luxurious finish matches

the overall attention to the finest possible quality, shown in

such details as the illuminated surrounds to the control

buttons, the milled top-panel logo, and the milled aluminum

disc tray.

Unsurpassed design and features

The X-01 is truly the most advanced Super Audio CD player to

date. Separation of power supplies for each major function

(digital audio, DAC circuitry, analog audio) ensures total

fidelity. The DACs have sub-ground impedances with

exceptional S/N figures. Full 5.1 surround Super Audio CD

playback is possible with the X-01.

Audio DACs

All audio channels use Burr-Brown 24-bit DA converters

(PCM1704). Improved linearity is achieved for the two front

channels by the use of 4-tip-converter for each channel.

The audio DAC boards employ a high-quality quartz crystal,

which results in the almost complete elimination of jitter and

subsequent high-quality DA conversion.

Word synchronization

A master word clock from a high-quality DA converter or

master clock generator can be used for clock synchronization,

resulting in the almost complete elimination of jitter.

Using a high-quality clock signal provided by an external DA

converter such as the Esoteric G-0/G-0s provides optimum

video and audio quality, up to 192kHz, optimizing a top-

ranking universal player like the X-01.

Features

ENGLISH

What's in the box

Please confirm that the following accessories are in the box

when you open it.

Remote control unit x 1

Batteries (AA, R6, SUM-3) x 2

Felt sheet x 3

Power cord x 1

Owner's manual x 1

Warranty card x 1

Conventions about This Manual

Instructions in this manual describe the controls on the

remote control. You can also use the buttons on the front

panel if they have the same or similar names as those on the

remote.

The types of functions and operations that can be used for a

particular disc vary depending on the features of that disc. In

some cases, these functions and operations may differ from

the descriptions given in this Owner's Manual.

The drawings about the front panel display used in this

Owner's Manual are purely for the purposes of explanation.

The actual displays may differ slightly from what are shown

here.

Read this before operation

As the unit may become warm during operation, always leave

sufficient space around the unit for ventilation.

The voltage supplied to the unit should match the voltage as

printed on the rear panel. If you are in any doubt regarding

this matter, consult an electrician.

Choose the installation location of your unit carefully. Avoid

placing it in direct sunlight or close to a source of heat. Also

avoid locations subject to vibrations and excessive dust, heat,

cold or moisture.

Do not place the unit on the amplifier/receiver.

Do not open the cabinet as this might result in damage to the

circuitry or electrical shock. If a foreign object should get into

the unit, contact your dealer or service company.

When removing the power plug from the wall outlet, always

pull directly on the plug, never yank the cord.

To keep the laser pickup clean, do not touch it, and always

close the disc tray.

Do not attempt to clean the unit with chemical solvents as

this might damage the finish. Use a clean, dry cloth.

Keep this manual in a safe place for future reference.

DO NOT MOVE THE UNIT DURING PLAYBACK

During playback, the disc rotates at high speed. Do NOT lift or

move the unit during playback. Doing so may damage the

disc or the unit.

WHEN MOVING THIS UNIT

When changing places of installation or packing the unit for

moving, be sure to remove the disc and return the disc tray to

its closed position in the player. Then, press the power switch

to turn the power off, and disconnect the power cord.

Moving this unit with the disc loaded may result in damage to

this unit.

Before Use

Placement of the unit

High-quality hardened tool steel is used for the pin-point feet,

securely attached to the bottom of the player. Although the

cover feet may appear loose, the weight of the unit causes them

to be firm and secure, and the design effectively damps and

reduces vibration.

Be careful to avoid injury when moving the unit, on account

of its weight. Get someone to help you if necessary.

To protect floors, etc. you may stick the felt supplied with the

unit to the bottom of the cover feet.

Pin-point foot

Bottom plate

of the unit

Steel foot

Cover foot retaining screws

Cover foot

Beware of condensation

When the unit (or a disc) is moved from a cold to a warm place,

or used after a sudden temperature change, there is a danger of

condensation; vapor in the air could condense on the internal

mechanism, making correct operation impossible. To prevent

this, or if this occurs, leave the unit for one or two hours with

the power turned on. Then the unit will stabilize at the

temperature of its surroundings.

Maintenance

If the surface of the unit gets dirty, wipe with a soft cloth or use

diluted neutral cleaning liquid. Be sure to remove any fluid

completely. Do not use thinner, benzine or alcohol as they may

damage the surface of the unit.

Reviews

There are no reviews of this manual yet.

Related Products

TEAC LSA8000 Owner's Manual

This manual has 8 pages, file size: 0.15 MB. It's available in languages: English.

TEAC X-01 Service Manual

This manual has 41 pages, file size: 6.68 MB. It's available in languages: English.

TEAC AG-D7900 Service Manual

This manual has 34 pages, file size: 4.04 MB. It's available in languages: English.

TEAC W880RX Owner's Manual

This manual has 43 pages, file size: 20.09 MB. It's available in languages: French, English, German, Italian.

TEAC RWH300 Owner's Manual

This manual has 72 pages, file size: 2.56 MB. It's available in languages: French, English, Spanish, German, Italian.